Condition: New Open Box
Operating System
Refer to RAID Card for details on supported Operating Systems:
PERC H810
Back-Panel Connectors
SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure
Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)
Chassis
Height
8.7cm (3.43 inches)
Width
48.2cm (18.98 inches)
Depth
59.4 (23.39 inches)
Weight
28.39 kg (62.6 lb) (maximum configuration)
8.84 kg (19.5 lb) (empty)
Connector
SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure
Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)
Connectivity
Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.
Environmental Operating Conditions
Temperature:
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius
Relative humidity:
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
Altitude:
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
LED Indicators
Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode
Drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive
EMM
3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM
Power supply/cooling fan module
3 LED status indicators for power supply status, power supply/fan fault and AC status
Management
2 Enclosure Management Modules(EMM) provide redundant enclosure management capability
Power
Two fully redundant power supplies; supports DC power
Wattage: AC - 600 W; DC – 700 W
Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr
Voltage: 100-240 VAC, auto sensing; 48V DC
Frequency: 50/60 Hz
Amperage: 8.6 A at 100 V, 4.3 A at 240 V
Available Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.16 A at +5V
up to 1.6 A +12V
RAID
PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.
Storage
Drives
Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K and 15K rpm and SAS Solid State Drives (SSDs)
Expansion for Mainstream and Capacity-Intensive Single Server Applications
Dell PowerVault MD1200 is the second generation of Dell’s low-cost, high-capacity expansion enclosure that improves density, versatility and performance over previous generation to enhance support for mainstream and capacity-intensive applications.
The PowerVault MD1200 offers seamless expansion for Dell PowerEdge servers with the PERC H810 Host-RAID adapter. It also offers drive flexibility when adding capacity or data tiering to any of Dell's primary storage arrays.
Easily Expand Your Server Capacity: The PowerVault MD1200 is engineered to seamlessly expand the capacity of Dell PowerEdge servers and PowerVault MD3 storage series.This expansion enclosure can support twelve, 3.5- or 2.5-inch SAS hard-disk drives (HDDs) or solid-state drives (SSDs)* in a 2U array and expands up to 8 arrays behind a single PERC H810 Host-RAID adapter.
Versatility and Flexibility to Meet Most Business Needs: The MD1200 is Dell’s most versatile direct-attached storage expansion enclosure. Featuring support for 2.5 inch drives, as well as the ability to mix 2.5-inch* and 3.5-inch enclosures behind a single PERC H810 Host-RAID adapter,the PowerVault MD1200 delivers capacity and performance to support most customer deployments.